Water Heater Installation & Replacement
Remove a dead tank and install a unit sized, fueled and vented to suit how your household uses hot water. Open page
Gas, sprinkler and business work
Emergency Gas Line Repair and Installation in Thornton
Gas piping brings fuel to your stove, dryer, furnace, water heater and grill. A leak or a bad connection is a safety issue, so this is work for a licensed professional, not a weekend project. Gas odor in the house? Walk everyone out first, then, from a distance, report the smell to 911 or the gas utility.
Gas odor? Get everyone out first, then call 911 or the gas company from the sidewalk.
Gas safety comes first
- Smell gasGet out, stay clear of switches and open flames, then dial 911 or the gas company.
- Hissing at a pipeA leak can be audible near a fitting.
- Appliance lights outA pilot that keeps failing may point to a supply issue.
What to do if you smell gas
Natural gas has an added odor like rotten eggs so that leaks are noticed. Leave the odor alone: skip the light switches, keep a phone in your pocket until you are outdoors and light nothing. Get people and pets out of the structure, then tell 911 or the gas utility from far enough away that you no longer smell it.
Stay out until the utility says the area is safe. A plumber can then repair or replace the piping.
New gas lines
Adding a gas line serves a range, a dryer, a fireplace, an outdoor grill, a fire pit or a standby generator. The plumber sizes the pipe to the total load, chooses the material and routes it through walls, floors or underground.
Gas pipe must be sized for the appliances it feeds. A pipe that is too small starves appliances at peak demand, and a unit may not fire correctly.
Cost
Pricing gas piping work
Gas jobs are priced by the length, the route and the appliance load.
Ask for the pipe size and material in writing, and who handles the permit.
In Thornton
Altitude and winter loads
Thornton sits near 5,210 feet, and gas appliances need the manufacturer's altitude instructions for correct burner setup. A new appliance that runs poorly may need those adjustments.
Winter demand is high on the Front Range, and a pipe that is too small shows up on the coldest nights. Ask the plumber to size for peak load, including any future appliance.
Repairs and replacements
Old gas pipe may corrode at joints. Flexible appliance connectors wear out and can crack. A plumber checks joints with a leak detector solution or an electronic sensor and tests the system for pressure drop.
Replace connectors when you replace an appliance. A new connector costs little and prevents a lot of trouble.
Shutoffs and testing
Every gas appliance should have its own shutoff valve within reach. The main shutoff sits at the meter. Know where both are and how to turn them with a wrench.
After any work, the system gets a pressure test and the appliances are checked for proper operation. Ask for the results in writing.
Permits and inspections
Gas work needs a permit and an inspection in most places. The inspector checks pipe size, materials, supports, testing and venting. Ask who pulls the permit, and keep the approval with your records.
A plumber who works without a permit puts you at risk for insurance and resale problems.
Permits and testing for gas piping
Gas piping work generally needs a permit and an inspection, and the inspector usually expects a pressure test on the new or altered line before it is covered or put into service. The building department that covers your address sets the exact steps. Confirm the contractor's license in DORA's online search, and call Colorado 811 first if the route crosses a yard.
Home systems that connect
Tankless Water Heater Service
Flush scale from an on-demand heater, repair it or replace it, with the setup this elevation calls for. Open page
New Construction Plumbing
Under-slab, rough-in and finish plumbing for ground-up homes and room additions. Open page
Quick answers
Asked about gas line
Head outside without touching switches, lighters or phones inside, then ring the gas utility or 911.
Yes. They size the pipe, install a shutoff and test the system.
Yes in most places. Ask your contractor.
Look for cracks, kinks or corrosion. If it is old, replace it when you replace the appliance.
The smell takes priority. Leave the building, keep away from switches and open flames, and use a phone outdoors to call 911 or the gas utility. Once the supply is made safe, ring the 24/7 line about fixing or replacing the piping.
Gas odor, or gas work planned?
Gas odor means walk out first. For planned piping, phone in and describe the job.